Pumps - SACEMI
Immersion pumps MPC series
General features
They are suitable for transferring liquids containing impurities up to 2 mm in size.Their hydraulic components: impeller in brass, feed screw and pump body in aluminium allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel).The temperature of the liquid must not exceed 90°C.They are commonly used on:- machine tools (milling and turning machines-machining centres)- filtration systemsThey are normally installed on a tank with a capacity which is proportional to their flow rate, about 4-5 cm from the bottom.It is important to make sure that the maximum liquid level in the tank is always 3-4 cm lower than the support flange.Should the liquid be particularly dirty, it is advisable to build a compartment tank in order to allow the sludge to deposit before it is sucked by the pump.
Products:
AREM code |
Pump model |
Nominal power kW. |
Height of suction mm |
1607351 |
MPC 80/B |
1,10 |
210 |
1607352 |
MPC 80/B |
1,10 |
260 |
1607353 |
MPC 80/B |
1,10 |
335 |
1607354 |
MPC 80/B |
1,10 |
450 |
1607355 |
MPC 80/C |
1,50 |
240 |
1607356 |
MPC 80/C |
1,50 |
290 |
1607357 |
MPC 80/C |
1,50 |
365 |
1607358 |
MPC 80/C |
1,50 |
480 |
1607359 |
MPC 90/B |
2,20 |
260 |
1607360 |
MPC 90/B |
2,20 |
310 |
1607361 |
MPC 90/B |
2,20 |
385 |
1607362 |
MPC 90/B |
2,20 |
500 |
1607363 |
MPC 100/B |
4,00 |
280 |
1607364 |
MPC 100/B |
4,00 |
330 |
1607365 |
MPC 100/B |
4,00 |
380 |
1607366 |
MPC 100/B |
4,00 |
430 |
1607367 |
MPC 100/B |
4,00 |
610 |